FLIR MR176 Imaging Moisture Meter

Thermal Imaging
Thermal Imaging Detector FLIR Lepton microbolometer
Image Calibration Automatic with manual lock scale option
Thermal Image Resolution 4800 pixels (80 × 60)
Spectral Response 8–14 μm  Field of View 51° × 38°
Sensitivity 150mK 
Detection Limit  (Wet Area Detection @ 32ft (10m) 19.7in2 (49cm2)    Image Frame Rate 9 Hz
Thermal Image Palettes Iron, Rainbow, Ice, Greyscale
Minimum Focus Distance 10 cm (4”)
Moisture Measurement Range Basic Accuracy
Pin Moisture 7% to 30% ±1.5% MC 30% to 100% Reference only
Pin Moisture Groups 9 material groups
Pinless Moisture Range 0 to 100 Relative
Pinless Measurement Depth 0.75" (19mm) Max
Measurement Resolution 0.1
Response Time Pinless 100 ms
Response Time Pin Mode 750 ms
Environmental Measurement Range Basic Accuracy
Relative Humidity 0 to 100% 2.5%RH
Air Temperature 32 to 122°F (0 to 50°C) ±1.1°F (±0.6°C)
Dew Point -22 to 122°F (-30 to 50°C) ±1.8°F (±1.0°C)
Vapor Pressure 0.0 to 12.0kPa ±0.05kPa
Mixing Ratio 0 to 560GPP (0.0 to 80.0 g/kg) ±2GPP (0.25 g/kg)
General Information
Display Type QVGA (320 × 240 pixel) 2.3” color TFT graphical display    Drop Test 3m
Saved Image File format BMP with measurement values overlaid
Stored Image Capacity 9999 images
Laser Orientation Single laser pointer to center of thermal image
Continuous Run Time 18 hours max
Typical Usage 4 work weeks
Battery 3.7V, 3000mAh Li-ion rechargeable via micro USB
Certification Standards EN 61326 (EMC), EN 60825-1 Class 2 (Laser)
Agency Approvals CE, FCC Class B, RCM
Warranty 2 Yr Product, 10 Yr Thermal Detector
Includes MR01 Replaceable Temperature and Relative Humidity Sensor, MR02 Standard Pin Probe, Quick Start Guide, International USB Charger, USB Cable

• Locating water leaks in domestic and commercial systems