Vanguard PCI600 600A Primary Injection Test Set

 vanguard-pci600.pdf

• The PCI600 can also be used for testing thermal, magnetic and solid-state motor-protection relays and molded-case circuit breakers.
• The PCI-600 is versatile and can also be used in many other applications that require a high-current source.
• Results displayed on a 4-line by 20-character backlit LCD
• Test currents from 10 to 600 amperes
• Also has an external-current input (0-10 A)

• The PCI-600’s built-in timer can test the timedelay
  characteristics of protection relays and
  molded-case circuit-breakers. Once the test
  is initiated, the current source and the timer
  are automatically turned on at the next zerocrossing
  point of the AC. The timer stops when
  the PCI-600 input detects a change in the dry
  contact or voltage input, or detects the removal
  of the test current.
• The test results are then displayed in milli-seconds and fractions of a cycle(s) on the unit’s back-lit LCD screen (20 characters by 4 lines).
• Test currents, ranging from 10 to 600 amperes,
  can be set by using the rotary dial knob on the
  control panel. The test current is then measured,
  and the results are displayed on the LCD screen.
  When the PCI-600 is used as a current source,
  the current-on time (duration of current flow) is
  displayed on the LCD screen.
  PCI-600 connections
• Output Current and Duration table
  - Output @ 240 Vac time
  - 9.5 Vac @ 100A 1 hour
  - 9.4 Vac @ 200A 5 minutes
  - 9.0 Vac @ 300A 2 minutes
  - 8.2 Vac @ 400A 1 minute
  - 7.5 Vac @ 500A 30 seconds
  - 7.0 Vac @ 600A 20 seconds
• External Current Input
• The PCI-600 also has an external-current input (0 – 10 A). Both the internal current source amplitude and the external current source measurement readings can be viewed at the same time.